The single rotor Impact Crusher is a kind of crush equipment which to use impact energy to crush material.when it works,the rotor rotate at a high circle speed by the motor'(TM)s force,when the material enter into the hammer'(TM)s working area, the ore crush with the hammer,then the ore will throw to the reflecting part,this is the seconed time crushing,when the ore was reflected from the reflecting board,there is a third crushing on the hammer,again and again.,the ore is getting samller and samller while it go down in the first to seconed and to third reflecting room.
Till the ore was crushed into the proper size,it go out through the exit.to adjust the distance between the single rotor and the reflect board,it can change the shape and the size of the ore.this kind of crusher can control the size of the finished ore,so the big block is not much,the size of the ore is certain in a area.that'(TM)s because the sieve board have the function to control the size of the ore.
The entrance for the ore is on the top of the cursher,there are two sets of the reflecting board in the two side of the crushing room.In addition, in order to meet the nesting size requirements and compensate for wear of the jaw plate, additional nesting population adjustment device, usually put in between the bracket seat and rear rack adjust shim or wedge. However, in order to avoid affecting production, the replacement of broken parts and hydraulics can be used to achieve insurance and adjustments.
댓글 없음:
댓글 쓰기